▦McAllen Shower DoorsRio Grande Valley • Se habla español
Custom glass • Measured & installed locally

Frameless shower doors in McAllen, done right.

Thick tempered glass, cut to your exact opening — no shower curtain, no flimsy kit from a big-box store. Free in-home measure, clear price before we cut anything, and installation across the Rio Grande Valley.

  • Free measure & written quote
  • 3/8″ & 1/2″ tempered safety glass
  • Chrome, black, brushed nickel & brass
  • Repairs & re-sealing too
Get my free quote → Estimate my price

Send photos of your shower and rough measurements in the form — most quotes start the same day.

Frameless sliding glass shower door installed in a modern tiled bathroom
Most installs: 1 visit to measure, 1 to installCustom glass is cut to order after measuring — typically 7–14 days from measure to install.
Frameless Doors Sliding / Bypass Doors Corner Enclosures Tub Doors Repairs & Re-Seal Se Habla Español
What we install

Shower glass for every bathroom & budget

From a single frameless door in a guest bath to a full steam enclosure in a primary suite — every panel is measured, cut, and edged for your opening.

Frameless hinged glass shower door with matte black handle and hardware

Frameless Hinged Doors

The clean, high-end look: 3/8″ or 1/2″ glass, minimal clips, no bulky frame. Makes a small McAllen bathroom feel twice as big.

$1,100–$2,400 typical installed
Frameless sliding glass shower door on a top rail in a white tiled shower

Sliding & Bypass Doors

Perfect where a swinging door would hit the toilet or vanity. Smooth top-rail sliders and classic bypass doors for showers and tubs.

$850–$1,900 typical installed
Frameless corner glass shower enclosure with black hardware

Corner & Neo-Angle Enclosures

Full enclosures that turn an open corner shower into a finished, water-tight space — with a door, return panel, and sealed edges.

$1,600–$3,200 typical installed
Frameless corner shower enclosure with black hinges

Tub Shower Doors

Ditch the curtain. Framed, semi-frameless, and frameless tub-height doors that keep water in and make cleaning far easier.

$650–$1,400 typical installed

Repairs, Hardware & Re-Sealing

Leaking, sagging, scraping, or a door that won't close? We replace worn seals and sweeps, hinges, handles, rollers, and re-align doors — often without replacing the glass.

$125–$450 typical repair visit

Custom Glass & Steam Showers

Floor-to-ceiling steam enclosures, transom panels, frosted or low-iron ultra-clear glass, and protective easy-clean coatings.

$2,200–$4,500+ typical installed
How it works

From first photo to finished install

1

Send photos + rough size

Use the form below. A photo of the opening and a tape-measure width is enough to start an accurate ballpark.

2

Free in-home measure

We confirm exact measurements, check walls for plumb, and give you a written price — glass thickness, finish, and hardware all spelled out.

3

Cut, temper & install

Your glass is cut and tempered to order (usually 7–14 days), then installed, sealed, and aligned in a single visit. We clean up and haul the old door.

Cost guide — McAllen / RGV

What does a shower door cost in the Valley?

Honest ranges for the Rio Grande Valley. Your exact price depends on size, glass thickness, and finish — the estimator gives you a ballpark in 20 seconds.

Instant ballpark estimator

Your estimated installed range
$1,450 – $1,950
Guide only — your free in-home measure gives the exact written price. Includes glass, hardware, install & sealing.
Get this as an exact quote →
ProjectTypical installed range
Tub door (framed)$650 – $1,100
Sliding shower door$850 – $1,900
Frameless hinged door$1,100 – $2,400
Frameless door + panel$1,600 – $2,900
Corner enclosure$1,600 – $3,200
Steam enclosure$2,200 – $4,500+
Repair / re-seal visit$125 – $450

What moves the price most: opening width, 1/2″ glass, specialty finishes, and out-of-plumb walls that need custom cuts. Measuring is always free.

Service areas

Shower doors across the Rio Grande Valley

Based in McAllen and installing valley-wide. Pick your city — measuring is free in every area below.

McAllen, TX

Our home base — from Sharyland and north McAllen remodels to new builds near Dove Ave and Ware Rd. Frameless doors are our #1 request here, especially 1/2″ glass with matte black or brushed gold hardware.

Edinburg, TX

Fast scheduling for homes near UTRGV, Monte Cristo, and the growing subdivisions off 281. Lots of tub-to-shower conversions here — we handle the door and enclosure once your tile is set.

Mission, TX

Serving Sharyland, Cimarron, and older Mission homes alike. For older baths we check wall plumb carefully and custom-cut glass so doors seal without gaps or leaks.

Weslaco, TX

Regular installs in Weslaco, Donna, and Mercedes — including Mid-Valley remodels and winter-Texan homes getting a bath refresh. Sliding doors and full enclosures are the most common jobs we quote here.

Pharr & San Juan, TX

Sliding and bypass doors are the favorites in Pharr and San Juan — great for tighter bathrooms where a swing door won't clear. Repairs and re-seals are usually scheduled within the week.

Outside this list? Ask in the form — we travel for larger enclosure and multi-bath jobs.

FAQ

Questions McAllen homeowners ask first

How long from measure to install?

Usually 7–14 days. Your glass has to be cut, polished, and tempered to your exact opening — tempered glass can't be trimmed afterward, which is why the free measure matters. Repairs are often done the same visit.

Frameless vs. framed — which should I choose?

Frameless (3/8″–1/2″ glass) looks cleaner, is easier to squeegee, and adds the most resale appeal. Framed and semi-frameless cost less and can be more forgiving in older bathrooms with out-of-plumb walls. We'll tell you honestly at the measure if your walls favor one over the other.

Will a frameless door leak?

A correctly measured frameless door uses seals and sweeps at the edges and keeps normal shower spray in. It's not a steam-tight seal like a framed unit — direct, high-pressure spray aimed at the gaps can mist a little. We position shower heads and seals at install to minimize it.

Can you replace just my broken or cloudy panel?

Yes — single-panel replacement is common. Send a photo and the panel size in the form. If the hardware is sound we reuse it, which keeps the cost down.

Do you need my tile finished before measuring?

Yes — final measurements are taken on finished tile or surround, because even 1/8″ changes the glass size. If you're mid-remodel, still reach out: we'll ballpark it now and measure the day your tile is done.

¿Hablan español?

Sí. Use the ES button at the top of this page and write to us in Spanish in the form — you'll get your quote and follow-up in Spanish.

Free quote

Get your exact price — free measure included

Tell us about the job and we'll reply with next steps and a time to measure. The more you share now, the tighter your first ballpark:

  • A photo of the shower / tub opening
  • Rough width × height in inches
  • Your city in the Valley
  • When you want it done

No pressure and no obligation. If it's a repair, describe the leak or the part that's failing.

Request a free quote

Pick photos here so they're listed in your request — then attach those same files when the email opens.

Submitting opens your email app addressed to leads@rgvshowerdoors.com — just press Send there and we'll get your request. Prefer another way? After building your request you can copy it instead.

Estimate priceFree quote →